BVMBN - BLUE RUSTLESS ENAMEL, 2424

  • MSDS: BVMBN
  • Manufacturer: PERVO PAINT CO
  • Product Name: BLUE RUSTLESS ENAMEL, 2424
  • National Stock Number: 8010-00N052341
Product Identification

Product ID:BLUE RUSTLESS ENAMEL, 2424
MSDS Date:06/14/1993
FSC:8010
NIIN:00N052341
MSDS Number: BVMBN

Responsible Party
PERVO PAINT CO
6624 STANFORD AVE
LOS ANGELES, CA 90001
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 213-758-1147

Cage: 86483

Contractor
PERVO PAINT CO
LOS ANGELES, CA 90001 US

Telephone: 213-758-1147

Cage: 86483

Ingredients

MINERAL SPIRITS

CAS: 64742-88-7

Fraction By Weight: 6-8%

OSHA PEL N/K

ACGIH TLV: N/K


VM&P NAPHTHA; (ALIPHATIC HYDROCARBONS)

CAS: 64742-89-8

Fraction By Weight: 26-30%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM


ISOBUTYL ALCOHOL; (ISOBUTANOL) (SARA III)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: 2-4%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


METHANOL (SARA III)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: <0.2%

OSHA PEL 200PPM, S

ACGIH TLV: 200 PPM; 250 STEL, S

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


420 G/L (3.5 LBS/GAL) (EX & IN

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: PROLONGED OR REPEATED CONTACT OF
PRODUCT WITH SKIN MAY CAUSE IRRITATION. EYES: DIRECT CONTACT OF
PRODUCT WITH EYES CAN CAUSE IRRITATION. INHAL: VAPOR OR MIST CAN
CAUSE HEADACHE, NAUSEA, IRRITATI ON OF NOSE, THROAT & EYES. MAY
PRODUCE CNS DEPRESSION. INGEST: POISONOUS IF SWALLOWED. MAY RESULT
IN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: VOMITING. ASPIRATION OF VOMITUS INTO
LUNGS CAUSES ASPIRATION PNEUMONITIS. CHRONIC: MAY CAUSE DAMAGE TO
THE CNS, RESPIRATORY SYSTEM, EYES & SKIN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: WASH AFFECTED AREAS W/WATER WHILE REMOVING CONTAMD
CLTHG. GET IMMED MED ATTN. LAUNDER CONTAMD CLTHG BEFORE REUSE.
EYES: FLUSH W/GENEROUS AMTS OF WATER FOR AT LEAST 15 MIN. GET IMMED
MED ATTN. IN GEST: DO NOT INDUCE VOMIT. CALL MD IMMED. NEVER GIVE
FLUIDS/INDUCE VOMIT IF VICTIM IS UNCON/HAVING CONVLS. INHAL: MOVE
TO FRESH AIR. AID IN BREATHING IF NECESSARY & GET IMMED MED ATTN.

Fire Fighting

Flash Point Method:TCC
Flash Point:55.0F,12.8C
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . BLANK VAPOR WITH EXTINGUISHING MEDIA.
Unusual Fire/Explosion Hazard:FLAMMABLE VAPOR CAN FORM EXPLOSIVE
MIXTURE WITH AIR.

Accidental Release

Spill Release Procedures:SPILLS SHOULD BE CONTAINED, SOLIDIFIED &
PLACED IN A RCRA LICENSED FACILITY. HANDLING EQUIPMENT TO BE
GROUNDED TO PREVENT SPARKING. WEAR NIOSH/MSHA APPROVED RESPIRATOR,
EYE & SKIN PROTECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
WHEN VAPORS ARE GENERATED ABOVE THE PERMISSABLE LIMIT.
Ventilation:LOCAL EXHAUST TO CONTROL TO RECOMMENDED PEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPVD CHEM WORK GOGG .
Other Protective Equipment:EMERG EYE WASH & DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA .
Work Hygienic Practices:SHOWER AFTER HANDLING THIS PRODUCT. CLEAN
CLOTHING SHOULD BE WORN DAILY.
Supplemental Safety and Health
WASTE DISP: TO PREVENT UNAUTHORIZED REUSE. OTHER CONTAINERS MUST BE
DISPOSED OF IN A RCRA LICENSED FACILITY.

Chemical Properties

Boiling Pt:B.P. Text:250F,121C
Melt/Freeze Pt:M.P/F.P Text:250F,121C
Vapor Pres:8 @ 20C
Vapor Density:3.5
Spec Gravity:1.04
Evaporation Rate & Reference:<1 (BUAC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLUE VISCOUS LIQUID; MILD AROMATIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING, REDUCING AGENTS IN CONJUNCTION WITH HEAT.
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS OR DIRECT
SUNLIGHT.
Hazardous Decomposition Products:OXIDES OF CARBON.

Disposal

Waste Disposal Methods:DISP MUST BE I/A/W FED, STATE & LOCAL REGS .
INCIN IN RCRA LICENSED FACILITY. DO NOT DISCHARGE INTO
WATERWAYS/SEWER SYS. EMPTY CNTNRS W/NO RESIDUE AT ALL MAY BE
LANDFILLED AT LICENSED FACILITY O R FOR RECONDITION. RECOM
CRUSHING/OTHER(SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.